1. Select Menu Extras --> Configurations.

2. From configurations window, on application setting group, check the item 'Use defined offset when export session'.

3. Uncheck item 'Extract all files to the same folder' and click OK button.

4. Open the SIS file.

5. Extract SIS file.

6. At this step, edit the PKG session as required.

7. If SIS file that opened(Item4) is Symbian9.x SIS file and that SIS file has embedded sis file(s) (otherwise go to Item8)which you will see the multiple of tabs, the first tab is the main sis file and the another one(s) is the embedded sis file which within main sis file.

To re-build up main sis file you must re-build that embedded sis file(s)again by select that embedded sis file tab and build.

After the embedded sis file(s) was built then you are ready to re-package or re-build main sis file by select the first tab on the screen.

Before you start to re-build, make sure you have alter the path of embedded sis file(s) to the embedded sis file which you re-built and save to that path. Note:

Due to 3rd sis file has embedded its embedded sis file as the contents which indices with SISController then you extract 3rd sis file that contains embedded sis file inside, all of embeded sis file will be extracted as contents in that embedded sis package.

This perfom one extraction for all contents in main 3rd sis package. This unlike the older sis file version which its embedded sis file will be stored in the main sis package as sis file.

8. If SIS file that opened(Item4) is Pre-Symbian9.x sis file you can re-built it now by go to menu Tools -----> Build SIS File of Press F3